|
|
|
SP series
60SP-NC
| | 60SP | 60SPNC-II | 60SP-NC | SP100 |
|---|
| Helix angle | ±45° | ±45° | ±45° | ±45° | Max. hobbed diameter
mm | 60 | 60 | 60 | 100 | Max. hobbed length
mm | 150 | 150 | 150 | 200 | Max. work length
mm | 200 | 200 | 200 | 350 | | Max. module (m) | 2.0 | 2.0 | 2.0 | 3.0 | | Number of teeth (Z) | 3-130(6-325) | 3-130(6-325) | 3-130 | 3-100 | Applicable max. hob (ID)
mm | Φ50(10) | Φ50(10) | Φ50(10) | Φ70
(selectable) | Hob speed (variable)
min-1 | 238-1,430(50Hz)
286-1,487(60Hz) | 200-2,000
(Inverter) | 200-2,000 | 200-1,500
(Inverter) | Cutting feed
mm/rev | 0.1-1.5 | 1.5-500
mm/min | 0.1-6,000
mm/min | 0.3-3.0 | Hob shift travel
mm | 30 | 30 | 40 | 50 | Main motor
kw | 1.5 | 1.5 | 2.2/3.7 | 3.7 | Total power
KVA | 4 | 4 | 12 | 10 | Floor area x height
mm | 1260x1200x1900 | 1200x1500x1900 | 1850x1850x1900 | 1600x1600x1860 | Machine weight
kgf | 1,500 | 1,600 | 2,300 | 2,300 |
|