GN150

1. The indexing head and the table are driven with a  servo-motor.

• Easy to change the number of flutes (change gears  are used on the former model.

• Table travel and traveling speed can be changed  (Cannot be changed on the former model).

2. The hob arbor is provided with a tail stock center  for the support to increase the
    holding rigidity of the hob arbor, thereby  shortening the cycle time to one-sixth of the former model.

3. Borazon grinding wheel (standard equipment)
    Diamond grinding wheels are available for carbide  hobs (optional).

Maximum workpiece diameter (mm)	Φ80
Maximum grinding length (mm)	100
No. of flutes:	2~20As required
Grinding wheel diameter (mm)	Φ125
Grinding wheel speed (min-1)	4,500
Power consumption (kVA)	2.1
Floor area x height (mm)	1050x1080x1600
Machine weight (kg)	730